Microtube and dry-block thermo shakers
A dry-block thermo shaker heats, cools and mixes the sample in one instrument, with no water bath and no separate heating block. It is the workhorse of PCR preparation, lysis, enzymatic digestion, denaturation and pellet resuspension. This subcategory holds the ALEMADR and ALEM3000 series: ALEMADR-TSHL and ALEMADR-TPS with heated lid, ALEMADR-MS and ALEMADR-MSC, and ALEM3000 with the cooled ALEM3000C.
- Block format — 0.2 ml PCR strips, 0.5 / 1.5 / 2.0 ml microtubes, 15 ml and 50 ml tubes — blocks are interchangeable, so one instrument serves several formats.
- Temperature range — typically RT+5 °C to 100 °C; cooling models (ALEM3000C, ALEMADR-MSC) go below ambient for enzyme work and 4 °C holding.
- Speed and orbit — up to 1500 rpm with a small orbit, enough to mix without splashing the cap.
- Heated lid — ALEMADR-TSHL and ALEMADR-TPS have a heated lid that prevents condensation on the tube cap during long incubation.
- Positions — from 12 to 54 positions depending on block and tube diameter.
If every protocol you run sits above room temperature, a heating-only model is enough. The moment enzymes, unstable samples or 4 °C holding enter the workflow, choose a model with Peltier cooling — retrofitting is not possible. A heated lid is the second thing worth paying for: without it, condensation forms on the cap and the concentration in the tube shifts during a long incubation.
Microtube / dry-block thermo shakers
Showing all 6 results
-
Microtube / dry-block thermo shakers
ALEMADR-TSHL Thermo Sheker with heating lid two block
ALEMADR-TSHL thermo shaker with heating lid, dual block, 200–2000 rpm on a 2 mm orbit, RT+5 °C to 100 °C with PID control and accuracy ≤ ±0.2 °C at 37 °C. Independently heated lid (Auto or 0 to +15 °C), timer 1 min – 99 h 59 min or continuous, multi-cycle and multi-point programs. Blocks for PCR plate, 0.5, 1.5 and 2.0 ml tubes ordered separately.
SKU: PRO6399 -
Microtube / dry-block thermo shakers
ALEMADR-TPS Laboratory Dry Block Thermo Shaker Incubator with heating lid
Microtube / dry-block thermo shakersALEMADR-TPS Laboratory Dry Block Thermo Shaker Incubator with heating lid
ALEMADR-TPS dry block thermo shaker — 200–3000 rpm, 0 °C to 105 °C, heated lid to 110 °C, fan cooling 100 → 37 °C in ≤ 12 min, 10 programs. Blocks for PCR plate and 0.5–2.0 ml tubes ordered separately.
SKU: PRO2647 -
Microtube / dry-block thermo shakers
ALEMADR-MS Laboratory Dry Block Thermo Shaker Incubator
COLO.Science · Thermo Shaker Incubator
ALEMADR-MS is a compact heating thermo shaker incubator for controlled incubation and orbital mixing of tubes, PCR formats, microplates and interchangeable thermo blocks.
RT+5–100°C · 0–1500 rpm · 2 mm orbit · SKU PRO4306
SKU: PRO4306 -
Microtube / dry-block thermo shakers
ALEMADR-MSC Laboratory Dry Block Thermo Shaker Incubator
COLO.Science · Heating / Cooling Thermo Shaker Incubator
ALEMADR-MSC is a compact heating and cooling thermo shaker incubator for controlled incubation, Peltier cooling and orbital mixing of tubes, PCR formats, microplates and interchangeable thermo blocks.
–20–100°C · 0–1500 rpm · Peltier cooling · SKU PRO3907
SKU: PRO3907
