COLO.Science — WEIGHING / MILLIGRAM PRECISION BALANCES — MILIA SERIES
MILIA milligram precision balance series 100–600 g / 1 mg with external calibration
MILIA milligram precision balance series is designed for routine laboratory weighing where 1 mg readability, compact glass draft protection and simple external calibration are required. The series covers 100 g, 200 g, 300 g, 400 g, 500 g and 600 g models and combines a 90 mm weighing pan, glass windshield, 3 s stabilization, RS232 / USB output and integrated 7.4 V lithium battery.
COLO.SCIENCE — ROUTINE MILLIGRAM LABORATORY WEIGHING
1 mg readability for sample preparation, formulation and QC weighing
MILIA is a compact milligram weighing platform for routine laboratory work where 0.001 g readability is required without moving to an analytical-balance workflow. The series covers common laboratory capacities from 100 g to 600 g and supports basic weighing, piece weighing and full-range tare.
The glass windshield helps reduce the influence of air movement on milligram measurements. RS232 and USB outputs support data transfer to compatible systems or optional printer workflows, while the integrated 7.4 V lithium battery supports flexible bench placement where mains power is not convenient.
Key characteristics
- Model capacities: 100 g, 200 g, 300 g, 400 g, 500 g and 600 g.
- Readability / resolution: 0.001 g / 1 mg across all models.
- Repeatability: ±0.002 g.
- Linearity: ±0.002 g.
- External calibration with suitable calibration weights.
- Glass windshield for air-movement protection.
- RS232 and USB output.
- Integrated 7.4 V lithium battery.
Suitable for
- Routine laboratory weighing with 1 mg readability.
- Sample preparation and small-batch formulation work.
- Quality-control checks and daily laboratory control.
- Piece weighing / counting of small parts by reference mass.
- Documented weighing with optional printer.
- External calibration and routine control with OIML F1 weights.
MILIA balance, printer and OIML F1 calibration weights
MILIA series covers 100–600 g capacity, 1 mg readability, external calibration, 3 s stabilization, glass windshield and RS232 / USB output.
Optional thermal printer supports direct printout of weighing results where laboratory procedures require printed records.
Optional OIML F1 calibration / control weights are used for external calibration, routine performance checks and documented control procedures.
MILIA series — model and SKU table
| SKU | Model | Capacity | Readability | Repeatability | Linearity | Calibration | Output |
|---|---|---|---|---|---|---|---|
| PRO2715 | MILIA 100g/1mg | 100 g | 0.001 g / 1 mg | ±0.002 g | ±0.002 g | External | RS232 / USB |
| PRO4837 | MILIA 200g/1mg | 200 g | 0.001 g / 1 mg | ±0.002 g | ±0.002 g | External | RS232 / USB |
| PRO2716 | MILIA 300g/1mg | 300 g | 0.001 g / 1 mg | ±0.002 g | ±0.002 g | External | RS232 / USB |
| PRO4481 | MILIA 400g/1mg | 400 g | 0.001 g / 1 mg | ±0.002 g | ±0.002 g | External | RS232 / USB |
| PRO2297 | MILIA 500g/1mg | 500 g | 0.001 g / 1 mg | ±0.002 g | ±0.002 g | External | RS232 / USB |
| PRO7054 | MILIA 600g/1mg | 600 g | 0.001 g / 1 mg | ±0.002 g | ±0.002 g | External | RS232 / USB |
Source note: SKU values, model capacities and performance values were transcribed from the supplied MILIA model list and technical table. Calibration is listed as external calibration, with optional F1 calibration weights recommended for routine control.
TECHNICAL SPECIFICATIONS — MILIA MILLIGRAM PRECISION BALANCE SERIES
| Product series | MILIA milligram precision balance series |
| Models | MILIA 100g/1mg, MILIA 200g/1mg, MILIA 300g/1mg, MILIA 400g/1mg, MILIA 500g/1mg, MILIA 600g/1mg |
| SKU | PRO2715, PRO4837, PRO2716, PRO4481, PRO2297, PRO7054 |
| Balance type | Milligram precision laboratory balance with external calibration and glass draft shield |
| Model capacities | 100 / 200 / 300 / 400 / 500 / 600 g |
| Maximum capacity | 600 g |
| Readability / resolution | 0.001 g / 1 mg |
| Repeatability | ±0.002 g |
| Linearity | ±0.002 g |
| Stabilization time | 3 s |
| Calibration | External calibration |
| Weighing modes | Basic weighing / piece weighing |
| Tare range | Full range |
| Draft shield | Glass protection against air movement |
| Battery | 7.4 V lithium battery |
| Interface / output | RS232, USB |
| Pan size | 90 mm |
| Power requirements | Adapter input: 100–240 V ~ 200 mA, 50–60 Hz, 12–18 VA; output: 5 VDC 2.5 A |
| Overall size | 280 × 190 × 270 mm |
| N.W. / G.W. | 4 kg / 6 kg |
| Shipping dimension | 43 × 30 × 41 cm |
Final weighing performance depends on installation quality, environmental stability, correct levelling, vibration control, warm-up routine, sample handling, external calibration procedure and selected F1 control-weight practice. Final model configuration, accessories, certificates and documentation are confirmed in the official quotation.
Operating and weighing functions
Milligram weighing
MILIA supports routine 1 mg laboratory weighing for samples, ingredients and small containers in daily laboratory workflows.
Piece weighing
Piece weighing mode supports basic counting of small parts by reference mass, where sample uniformity and reference preparation are appropriate.
Full-range tare
Full-range tare supports routine container tare workflows during sample preparation, formulation and QC weighing.
Data output
RS232 and USB interfaces support connection to compatible laboratory systems or optional printer workflows for measurement records.
OPTIONAL ACCESSORIES AND OIML F1 CALIBRATION WEIGHTS
Thermal printer, RS232 / USB data workflow and OIML F1 calibration / control weights
MILIA uses external calibration. Suitable OIML F1 weights are therefore important for calibration, routine performance checks and documented laboratory control procedures. The nominal mass, certificate type and control interval should be selected according to the chosen MILIA capacity, laboratory SOP and required calibration / control routine.
OIML F1 calibration / control weights
Recommended for MILIA external calibration, routine balance control, audit support and documented verification points.
Optional thermal printer
Supports direct printout of weighing results when laboratory procedures require printed measurement records.
Configuration logic
- 100–300 g models for routine low-capacity milligram weighing.
- 400–600 g models for larger containers or higher total sample load.
- RS232 / USB for printer, PC or compatible laboratory data workflows.
- F1 weights and certificates selected according to laboratory procedure.
Ordering note: optional accessories and F1 weights are not automatically included in standard MILIA delivery. Printer, communication accessories, F1 weights, certificates and documentation requirements should be confirmed before the final quotation.
Standard delivery, options and data output
Typical standard delivery
Typical MILIA delivery includes the selected milligram precision balance, 90 mm weighing pan, glass windshield, external calibration workflow and standard laboratory power supply configuration.
Available options
Optional configuration may include thermal printer, communication accessories, PC data workflow and OIML F1 calibration / control weights.
RS232 / USB data workflow
RS232 and USB interfaces support compatible printers, computers and laboratory data workflows. Exact communication requirements should be confirmed before quotation.
WEIGHING CATALOGUE
Compare milligram balances, precision balances and weighing accessories
Use the weighing catalogue to compare MILIA models with other milligram balances, precision balances, analytical balances, calibration weights and weighing accessories.
COLO.SCIENCE KNOWLEDGE AND SUPPORT
Selection support for milligram balances and F1 calibration weights
COLO.Science supports complete weighing configurations: balance selection, external calibration routine, F1 weight selection, certificates, printer workflows, interface options and documented weighing procedures for laboratory users.
Applications and operational value
Routine milligram weighing
MILIA is suitable for daily laboratory workflows where 1 mg readability is required for powders, ingredients and small laboratory samples.
External calibration workflow
External calibration with suitable F1 weights supports controlled laboratory routines, documented verification points and periodic balance checks.
Compact draft protection
The glass windshield helps reduce air movement during 1 mg weighing and supports more stable bench-top measurement conditions.
Portable bench use
The integrated lithium battery supports flexible bench placement when mains power is not convenient for the weighing task.
How to select the appropriate MILIA model
When selecting a MILIA model, first define the maximum total mass on the weighing pan: sample, container, weighing vessel and any accessories used during the method. Choose lower-capacity models for compact sample preparation and routine milligram work, and choose 400–600 g models when larger containers or higher total load are required.
For documented laboratory work, define the external calibration routine, suitable F1 calibration weight, printer requirement, RS232 / USB output needs, certificate requirements and acceptable weighing limits. COLO.Science can help confirm the model, accessories and documentation package before quotation.
MILIA milligram precision balance for 1 mg routine laboratory weighing
MILIA milligram precision balance series is suitable for laboratories that need practical 1 mg weighing for routine samples, ingredients, formulation checks, QC workflows and piece weighing. The series combines compact construction, glass windshield, external calibration, RS232 / USB communication and a lithium battery in a laboratory balance platform covering 100–600 g.
In practical use, MILIA performance depends on correct installation, stable temperature, suitable weighing bench, proper levelling, external calibration routine, vibration control and a suitable F1 control-weight procedure. Optional printer and communication accessories can be added according to laboratory method and documentation requirements.
Configuration notice
MILIA milligram precision balance models may be supplied with different accessory sets depending on the selected SKU model, printer, communication accessories, OIML F1 calibration / control weights, certificates and documentation requirements. The official quotation defines the final delivery scope, including confirmed model, SKU and accessory configuration. Website content is intended for general product presentation and may not represent the exact delivered configuration. Specifications may change without notice.
