COLO.SCIENCE — ROUTINE MILLIGRAM LABORATORY WEIGHING
1 mg readability with compact plastic air-draft protection
MILIC is a compact milligram weighing platform for routine laboratory work where 0.001 g readability is required in a practical bench-top format. The series covers common laboratory capacities from 100 g to 500 g and supports basic weighing, piece weighing and full-range tare.
The plastic draft shield helps reduce the influence of air movement on milligram measurements. RS232 and USB outputs support data transfer to compatible systems or optional printer workflows, while the optional 7.4 V rechargeable accumulator supports flexible bench placement when mains power is not convenient.
Key characteristics
- Catalogue SKU codes: PRO3323, PRO3906, PRO3263, PRO3550 and PRO6051.
- Model capacities: 100 g, 200 g, 300 g, 400 g and 500 g.
- Readability / resolution: 0.001 g / 1 mg across all models.
- Repeatability: ±0.002 g.
- Linearity: ±0.002 g.
- Stabilization time: 3 seconds.
- External calibration with suitable calibration weights.
- Plastic draft shield for air-movement protection.
- Full-range tare and piece weighing support.
- RS232 and USB output.
- Optional 7.4 V rechargeable accumulator.
Suitable for
- Routine laboratory weighing with 1 mg readability.
- Sample preparation and small-batch formulation work.
- Quality-control checks and daily laboratory control.
- Piece weighing / counting of small parts by reference mass.
- Documented weighing with optional printer.
- External calibration and routine control with OIML F1 weights.
MILIC SERIES — PRACTICAL SELECTION FOR 1 MG LABORATORY WEIGHING
MILIC milligram precision balance for routine laboratory tasks
MILIC milligram precision balance is suitable when a laboratory needs reliable weighing with 1 mg readability, external calibration and practical protection from air movement. With capacities from 100 g to 500 g, the MILIC series covers typical laboratory tasks such as sample preparation, mass control, small formulations, raw-material checks and piece counting by reference mass.
When selecting a model, MILIC milligram precision balance should be matched to the maximum total load on the pan: sample, container and any accessories used during the method. The 100 g, 200 g and 300 g models are practical for smaller samples and precise routine weighing, while the 400 g and 500 g models provide more room for larger containers or higher total mass.
For stable work, MILIC milligram precision balance should be used on a calm, levelled bench with control of air movement and regular external calibration using suitable OIML F1 weights. This makes MILIC a practical solution for laboratories that need simple operation, 1 mg readability, RS232 / USB output and optional documentation of results with a thermal printer.
MILIC balance, printer and OIML F1 calibration weights
MILIC series covers 100–500 g capacity, 1 mg readability, external calibration, 3 s stabilization, plastic draft shield and RS232 / USB output.
Optional thermal printer supports direct printout of weighing results where laboratory procedures require printed records.
Optional OIML F1 calibration / control weights are used for external calibration, routine performance checks and documented control procedures.
MILIC series — model and SKU configuration
MILIC100
SKU: PRO3323
Model: MILIC100
Capacity: 100 g
Readability: 0.001 g / 1 mg
Repeatability: ±0.002 g
Linearity: ±0.002 g
Calibration: External
Draft shield: Plastic
Output: RS232 / USB
MILIC200
SKU: PRO3906
Model: MILIC200
Capacity: 200 g
Readability: 0.001 g / 1 mg
Repeatability: ±0.002 g
Linearity: ±0.002 g
Calibration: External
Draft shield: Plastic
Output: RS232 / USB
MILIC300
SKU: PRO3263
Model: MILIC300
Capacity: 300 g
Readability: 0.001 g / 1 mg
Repeatability: ±0.002 g
Linearity: ±0.002 g
Calibration: External
Draft shield: Plastic
Output: RS232 / USB
MILIC400
SKU: PRO3550
Model: MILIC400
Capacity: 400 g
Readability: 0.001 g / 1 mg
Repeatability: ±0.002 g
Linearity: ±0.002 g
Calibration: External
Draft shield: Plastic
Output: RS232 / USB
MILIC500
SKU: PRO6051
Model: MILIC500
Capacity: 500 g
Readability: 0.001 g / 1 mg
Repeatability: ±0.002 g
Linearity: ±0.002 g
Calibration: External
Draft shield: Plastic
Output: RS232 / USB
Source note: MILIC SKU values and model capacities were transcribed from the supplied MILIC model list. Technical characteristics follow the 1 mg milligram precision balance specification, with MILIC-specific plastic air-draft protection and optional accumulator noted.
TECHNICAL SPECIFICATIONS — MILIC MILLIGRAM PRECISION BALANCE SERIES
| Product series | MILIC milligram precision balance series |
| Models | MILIC100, MILIC200, MILIC300, MILIC400, MILIC500 |
| SKU | PRO3323, PRO3906, PRO3263, PRO3550, PRO6051 |
| Balance type | Milligram precision laboratory balance with external calibration and plastic draft shield |
| Model capacities | 100 / 200 / 300 / 400 / 500 g |
| Maximum capacity | 500 g |
| Readability / resolution | 0.001 g / 1 mg |
| Repeatability | ±0.002 g |
| Linearity | ±0.002 g |
| Stabilization time | 3 s |
| Calibration | External calibration |
| Weighing modes | Basic weighing / piece weighing |
| Tare range | Full range |
| Draft shield | Plastic protection against air movement |
| Battery / accumulator | Optional 7.4 V rechargeable accumulator |
| Interface / output | RS232, USB |
| Pan size | 90 mm |
| Power requirements | Adapter input: 100–240 V ~ 200 mA, 50–60 Hz, 12–18 VA; output: 5 VDC 2.5 A |
| Overall size | 280 × 190 × 270 mm |
| N.W. / G.W. | 4 kg / 6 kg |
| Shipping dimension | 43 × 30 × 41 cm |
Final weighing performance depends on installation quality, environmental stability, correct levelling, vibration control, warm-up routine, sample handling, external calibration procedure and selected F1 control-weight practice. Final model configuration, accessories, certificates and documentation are confirmed in the official quotation.
Operating and weighing functions
Milligram weighing
MILIC supports routine 1 mg laboratory weighing for samples, ingredients and small containers in daily laboratory workflows.
Piece weighing
Piece weighing mode supports basic counting of small parts by reference mass, where sample uniformity and reference preparation are appropriate.
Full-range tare
Full-range tare supports routine container tare workflows during sample preparation, formulation and QC weighing.
Data output
RS232 and USB interfaces support connection to compatible laboratory systems or optional printer workflows for measurement records.
OPTIONAL ACCESSORIES, ACCUMULATOR AND OIML F1 CALIBRATION WEIGHTS
Thermal printer, optional accumulator and OIML F1 calibration / control weights
MILIC uses external calibration. Suitable OIML F1 weights are therefore important for calibration, routine performance checks and documented laboratory control procedures. The nominal mass, certificate type and control interval should be selected according to the chosen MILIC capacity, laboratory SOP and required calibration / control routine.
OIML F1 calibration / control weights
Recommended for MILIC external calibration, routine balance control, audit support and documented verification points.
Optional thermal printer
Supports direct printout of weighing results when laboratory procedures require printed measurement records.
Optional accumulator
The optional 7.4 V rechargeable accumulator supports flexible bench placement where mains power is not convenient or when occasional mobile bench use is required.
Ordering note: optional accessories, accumulator and F1 weights are not automatically included in standard MILIC delivery. Printer, accumulator, communication accessories, F1 weights, certificates and documentation requirements should be confirmed before the final quotation.
Standard delivery, options and data output
Typical standard delivery
Typical MILIC delivery includes the selected milligram precision balance, 90 mm pan, plastic draft shield, external calibration workflow and standard laboratory power supply configuration.
Available options
Optional configuration may include thermal printer, rechargeable accumulator, communication accessories, PC data workflow and OIML F1 calibration / control weights.
RS232 / USB data workflow
RS232 and USB interfaces support compatible printers, computers and laboratory data workflows. Exact communication requirements should be confirmed before quotation.
COLO.SCIENCE — APPLICATION AND CONFIGURATION SUPPORT
COLO.Science supports complete weighing configurations: balance selection, external calibration routine, F1 weight selection, certificates, printer workflows, accumulator option, interface options and documented weighing procedures for laboratory users.
Applications and operational value
Routine milligram weighing
MILIC is suitable for daily laboratory workflows where 1 mg readability is required for powders, ingredients and small laboratory samples.
External calibration workflow
External calibration with suitable F1 weights supports controlled laboratory routines, documented verification points and periodic balance checks.
Plastic draft protection
The plastic draft shield helps reduce air movement during 1 mg weighing and supports more stable bench-top measurement conditions.
Optional accumulator use
The optional rechargeable accumulator supports flexible bench placement when mains power is not convenient for the weighing task.
How to select the appropriate MILIC model
When selecting a MILIC model, first define the maximum total mass on the pan: sample, container, weighing vessel and any accessories used during the method. Choose lower-capacity models for compact sample preparation and routine milligram work, and choose 400–500 g models when larger containers or higher total load are required.
For documented laboratory work, define the external calibration routine, suitable F1 calibration weight, printer requirement, RS232 / USB output needs, accumulator requirement, certificate requirements and acceptable weighing limits. COLO.Science can help confirm the model, accessories and documentation package before quotation.
MILIC milligram precision balance for 1 mg routine laboratory weighing
MILIC milligram precision balance series is suitable for laboratories that need practical 1 mg weighing for routine samples, ingredients, formulation checks, QC workflows and piece weighing. The series combines compact construction, plastic draft shield, external calibration, RS232 / USB communication and optional rechargeable accumulator in a laboratory balance platform covering 100–500 g.
In practical use, MILIC performance depends on correct installation, stable temperature, suitable weighing bench, proper levelling, external calibration routine, vibration control and a suitable F1 control-weight procedure. Optional printer, optional accumulator and communication accessories can be added according to laboratory method and documentation requirements.
Configuration notice
MILIC milligram precision balance models may be supplied with different accessory sets depending on the selected SKU model, printer, optional accumulator, communication accessories, OIML F1 calibration / control weights, certificates and documentation requirements. The official quotation defines the final delivery scope, including confirmed model, SKU and accessory configuration. Website content is intended for general product presentation and may not represent the exact delivered configuration. Specifications may change without notice.
