Two Shops
One Shipment

MBINCP Peltier Cooled Incubator, 45 and 70 L, RT−20 to 65 °C


COLO.Science · Peltier Cooled Incubator

45 · 70 L · RT−20 to 65 °C · Peltier · ±0.5 °C · Stackable

COLO.Science · Incubation & Controlled Environments · Peltier Cooled Incubator

MBINCP Peltier Cooled Incubator · 45 and 70 L · RT−20 to 65 °C

The Peltier cooled incubator MBINCP heats and cools with a semiconductor module instead of a compressor. It runs quietly, without refrigerant and without vibration, and holds the set point from 20 °C below room temperature up to 65 °C. Two sizes: 45 L and 70 L.

Models and order codes

Model Order code Volume Temperature Chamber W × D × H Exterior W × D × H Power
MBINCP45 PRO7361 45 L RT−20 to 65 °C 330 × 320 × 430 mm 415 × 445 × 758 mm 350 W
MBINCP70 PRO7362 70 L RT−20 to 65 °C 415 × 350 × 500 mm 500 × 475 × 828 mm 500 W

Both models cool with a Peltier module, circulate the air with a fan, have a colour display and an inner glass door, and can be stacked two units of the same size.

Quiet Peltier cooled incubator for work near room temperature

A Peltier module moves heat out of the chamber or into it, so one unit both cools and heats without a compressor. With no moving parts in the cooling system there is no vibration and almost no noise, which suits sensitive cultures and quiet rooms. A fan circulates the air for an even temperature, and an intelligent PID controller with a Pt100 sensor holds the set point within ±0.5 °C.

MBINCP Peltier cooled incubator with colour display

Key features

  • Chamber 45 or 70 L, mirror stainless steel
  • Temperature from RT−20 °C to 65 °C; ±0.5 °C at 37 °C
  • Peltier (semiconductor) cooling: no compressor, no refrigerant
  • Quiet operation without vibration
  • Forced air circulation with fan
  • Colour LCD, PID control, Pt100 sensor, timer 0–9999 min
  • Inner glass door with door switch
  • Stacking feet: two units of the same size one on top of the other

Suitable for

  • Microbiology at 20–37 °C in warm laboratories
  • Cultures, insects and seeds that do not tolerate vibration
  • BOD and other tests near room temperature in a compact unit
  • Teaching laboratories and quiet rooms

Peltier or compressor?

Choose MBINCP when you work near room temperature and want a quiet unit without refrigerant: at 25 °C ambient it reaches about 5 °C. For 0 °C or −10 °C, larger volumes or a warm room choose the compressor-cooled MBINC refrigerated incubators (70 to 250 L).

For work only above room temperature see the MBINF forced-air incubators.

Technical specifications

Temperature and control

Temperature RT−20 to 65 °C
Stability ±0.5 °C
Uniformity ±0.5 °C at 37 °C
Resolution 0.1 °C
Controller PID, Pt100
Timer 0–9999 min

Cooling and size

Volume 45 · 70 L
Cooling Peltier module
Air circulation forced, with fan
Display colour LCD
Power 350 · 500 W
Supply 220 V, 50/60 Hz

Typical values, measured without load. RT = room temperature. Dimensions and weights are in the PDF.

Installation and care

Place the incubator on a bench or on the floor with free space at the back and the sides, so the heat sink of the Peltier module can release heat. The lowest set point follows the room temperature, so keep the room cool when you work near 5–10 °C. Stack only two units of the same size.

Standard delivery and options

  • Peltier cooled incubator in the chosen size, with shelves.
  • Inner glass door and door switch.
  • Option: extra shelves.
  • Option: temperature certificate at a chosen point.

The configuration for a specific order is the one confirmed in the COLO.Science quotation.

Technical documents and knowledge base

MBINCP technical specification (PDF) — both models with dimensions, specifications and configuration checklist. Methods and application notes: our knowledge base.

Configuration note

Tell us the temperature, the room temperature and the number of samples. COLO.Science will confirm the model in the quotation.

Sales and support for international customers

COLO Lab ExpertsPolje ob Sotli 4, SI-3255 Buče, Slovenia
Phone: +386 70 713 437 · Email: sales@colo.si · Web: colo.si
We supply laboratories across Europe directly and through partners. B2B prices are quoted net, excluding VAT.

Which incubator fits your lab?

Send the temperature, the room temperature and the number of samples. COLO.Science will confirm the model and the delivery time.

SKU: MBINCP Category:
Incubators

, ,

,

You may also like…

Request a Quote