CIBAC-HP — High Precision Heating/Cooling Circulating Bath 0.001°C
OVERVIEW
CIBAC-HP high precision heating/cooling circulating baths are designed for workflows where temperature stability and long-term reproducibility matter.
The bath supports internal use and external circulation via a built-in pump, enabling stable temperature control for connected systems (jackets, reactors, closed-loop setups).
Typical use cases include calibration, validation and regulated QC steps where small temperature deviations can impact results.
A microprocessor controller with PT100 sensor supports precise temperature control and clear monitoring of working conditions.
TECHNICAL SPECIFICATIONS — CIBAC-49HPD (10 L)
| Model | CIBAC-49HPD |
| Bath volume | 10 L |
| Temperature range | -20 ~ 100°C |
| Display / resolution | Digital display; 0.001°C resolution (0.01°C also referenced) |
| Temperature fluctuation | ±0.005°C ~ ±0.02°C |
| Precision (as listed) | ±0.05°C |
| Pump flow (external circulation) | 6 L/min |
| Opening of bath (mm) | 180 × 140 |
| Power consumption | 1000 W |
| Supply voltage | 220V / 110V, 50Hz / 60Hz |
| Controller / sensor | Microprocessor controller with PT100 sensor |
| Refrigerant / compressor | R134a, CFC-free refrigerant; hermetic compressor |
| PDF reference | Open CIBAC-HP technical sheet (PDF) |
Manufacturer reserves the right to change technical specifications. Always confirm the exact configuration in the official PDF.
MODEL COMPARISON — CIBAC-HP SERIES
| Model | Volume | Temp. range | Power | Bath opening (mm) |
|---|---|---|---|---|
| CIBAC-46HP | 6 L | -20 ~ 100°C | 800 W | 180 × 140 |
| CIBAC-46HPD | 7 L | -40 ~ 100°C | 800 W | 180 × 140 |
| CIBAC-49HPD | 10 L | -20 ~ 100°C | 1000 W | 180 × 140 |
| CIBAC-51HPD | 15 L | -20 ~ 100°C | 1500 W | 235 × 160 |
| CIBAC-53HPD | 30 L | -5 ~ 100°C | 2000 W | 310 × 280 |
| CIBAC-55HPD | 30 L | -20 ~ 100°C | 2000 W | 310 × 280 |
| CIBAC-57HPD | 10 L | -20 ~ 100°C | 800 W | 235 × 160 |
Series table is shown for selection guidance; confirm the exact configuration in the official PDF.
Selection note
High precision circulating baths are typically selected according to temperature range, stability requirements and external circulation needs. For validation/QC workflows, always confirm documentation and options in the official technical sheet.
