Lab Equipment
Showing 625–648 of 782 results
-
-
Sample concentrators
SACO300 Sample Concentrator RT+5°C to 160°C
-
- High precision and wide range of temp control.
- Blowing a large number of samples at one time.
- Blowing each sample independently.
- Easy operation; safe and reliable to use.
Analysis of pesticide residues: vegetables, fruits, cereals, plant tissue.
Environmental analysis: such as drinking water, groundwater and polluted water samples.
Biological analysis: such as hormone analysis, sample preparation of liquid phase and gas phase and mass spectrometry analysis.
Food and beverage: such as milk, wine, beer, etc.
Pharmaceutical drug testing: such as traditional Chinese medicine pharmaceutical, drug screening.SKU: PRO4672 -
-
Sample concentrators
SACO400 Nitrogen Sample Concentrator RT+5°C to 160°C
-
- High precision and wide range of temp control.
- Blowing a large number of samples at one time.
- Blowing each sample independently.
- Easy operation; safe and reliable to use.
Analysis of pesticide residues: vegetables, fruits, cereals, plant tissue.
Environmental analysis: such as drinking water, groundwater and polluted water samples.
Biological analysis: such as hormone analysis, sample preparation of liquid phase and gas phase and mass spectrometry analysis.
Food and beverage: such as milk, wine, beer, etc.
Pharmaceutical drug testing: such as traditional Chinese medicine pharmaceutical, drug screening.SKU: PRO4673 -
-
CO2 Incubators
MBINCO 160L Laboratory CO2 Incubator
Sensitive far infrared CO2 sensor and automatic calibration function brings about accurate control of CO2 concentration.
● HEPA filter installed inside ensures the inner air quality reaches level 100.
● Breeze circulation system brings no effect to the cell culturing.
● When the door is open, the fan will stop to keep from the convection of internal air and external air, and heating system will stop to prevent over temperature.
● Direct 6-side heating wire heating, and air jacket design bring about short warming up time, no over temperature, and good uniformity.
● SUS304 Cu mirror stainless steel chamber with foursquare arc transition design can keep from bacteria and experiment contamination.● Bottom heating natural evaporation humidification plate ensures high humidity culturing environment
● Hidden UV lamp sterilizes the water in the humidification plate and the circulating air to make the experiment environment clean.
● double layer door design: reinforced glass internal door makes sure the scalability.
● Adjustable direction of door opening meets different custom users.
● Internal door heating system keeps from moisture condensing.
● Air inlet HEPA DUF filters dust of which diameter is larger than 0.33 um with efficiency of 99.97%, and minimize the pollution in the working chamber.
● Over-temperature alarm, CO2 concentration abnormality alarm, and warning water level alarm.
● Convenient PID operation: running with data set and time set, automatic shut-down based on setting, and automatic recovery to previous status after power outage and recovery .
● Special function key for temperature setting.
● Auxiliary menus make over-temperature alarm, deviation adjusting, and menu lock come true.SKU: PRO3126 -
CO2 Incubators
MBINCO50 Laboratory CO2 Incubator 50 Liter
Sensitive far infrared CO2 sensor and automatic calibration function brings about accurate control of CO2 concentration.
● HEPA filter installed inside ensures the inner air quality reaches level 100.
● Breeze circulation system brings no effect to the cell culturing.
● When the door is open, the fan will stop to keep from the convection of internal air and external air, and heating system will stop to prevent over temperature.
● Direct 6-side heating wire heating, and air jacket design bring about short warming up time, no over temperature, and good uniformity.
● SUS304 Cu mirror stainless steel chamber with foursquare arc transition design can keep from bacteria and experiment contamination.● Bottom heating natural evaporation humidification plate ensures high humidity culturing environment
● Hidden UV lamp sterilizes the water in the humidification plate and the circulating air to make the experiment environment clean.
● double layer door design: reinforced glass internal door makes sure the scalability.
● Adjustable direction of door opening meets different custom users.
● Internal door heating system keeps from moisture condensing.
● Air inlet HEPA DUF filters dust of which diameter is larger than 0.33 um with efficiency of 99.97%, and minimize the pollution in the working chamber.
● Over-temperature alarm, CO2 concentration abnormality alarm, and warning water level alarm.
● Convenient PID operation: running with data set and time set, automatic shut-down based on setting, and automatic recovery to previous status after power outage and recovery .
● Special function key for temperature setting.
● Auxiliary menus make over-temperature alarm, deviation adjusting, and menu lock cSKU: PRO4226 -
CO2 Incubators
MBINCOS1 CO2 Incubator with 90℃ steam sterilization Chamber
Sensitive far infrared CO2 sensor and automatic calibration function brings about accurate control of CO2 concentration.
● HEPA filter installed inside ensures the inner air quality reaches level 100.
● Breeze circulation system brings no effect to the cell culturing.
● When the door is open, the fan will stop to keep from the convection of internal air and external air, and heating system will stop to prevent over temperature.
● Direct 6-side heating wire heating, and air jacket design bring about short warming up time, no over temperature, and good uniformity.
● SUS304 Cu mirror stainless steel chamber with foursquare arc transition design can keep from bacteria and experiment contamination.● Bottom heating natural evaporation humidification plate ensures high humidity culturing environment
● Hidden UV lamp sterilizes the water in the humidification plate and the circulating air to make the experiment environment clean.
● double layer door design: reinforced glass internal door makes sure the scalability.
● Adjustable direction of door opening meets different custom users.
● Internal door heating system keeps from moisture condensing.
● Air inlet HEPA DUF filters dust of which diameter is larger than 0.33 um with efficiency of 99.97%, and minimize the pollution in the working chamber.
● Over-temperature alarm, CO2 concentration abnormality alarm, and warning water level alarm.
● Convenient PID operation: running with data set and time set, automatic shut-down based on setting, and automatic recovery to previous status after power outage and recovery .
● Special function key for temperature setting.
● Auxiliary menus make over-temperature alarm, deviation adjusting, and menu lock come true.SKU: PRO5419 -
CO2 Incubators
MBINCOSD CO2 Incubator sterilization up to 140C
- Sensitive far infrared CO2 sensor and automatic calibration function brings about accurate control of CO2 concentration.
- HEPA filter installed inside ensures the inner air quality reaches level 100.
- Hot air sterilization up to 140C
SKU: PRO3401, PRO3402, PRO3969 -
Special Balances
CENT600C Balance for Textile with GSM Cutter 600g/0.01g
Capacity: 600 g · Readability: 0.01 g · GSM cutter area: 100 cm² · Sample diameter: approx. 113 mm · Cutting depth: up to 5 mm · Load cell: high precision, up to 30 kg · Calibration: external linear · Tare: full range · Protection: overload + antivibration · Under-hook weighing: available · Materials: textile, carpet, film, foam, paper, board
SKU: CRNT600C -
Industrial Balances /0,1g, Precision Balances 0.1g
DECB30 High-Precision Industrial Balance 30 kg / 0.1 g
-29%
Industrial Balances /0,1g, Precision Balances 0.1gDECB30 High-Precision Industrial Balance 30 kg / 0.1 g
DECB30 high-precision industrial balance, 30 kg / 0.1 g, detachable backlit LCD, 255 × 190 mm stainless-steel pan, external calibration, piece counting, check weighing, optional RS232C.
SKU: PRO2703 -
-
Special Balances
HYBANB320 hydrostatic analytical balance 320 g / 0.1 mg
HYBANB320 hydrostatic analytical balance; 320 g capacity; 0.1 mg readability; internal calibration; touch screen LCD; density weighing; temperature compensation; parts counting; RS232 output; optional E2 weights/printer.
SKU: PRO2304
