Two Shops
One Shipment
, ,

ORSHAWB Shaking Water Bath, RT to 100 °C, 20–200 rpm, 31 L


COLO.Science · Shaking Water Bath

RT–100 °C · ±0.1 °C · 20–200 rpm · 31 L · Reciprocating

1.850,00€

COLO.Science · Shakers & Mixers · Shaking Water Bath

ORSHAWB Thermostatic Shaking Water Bath · RT to 100 °C · 20–200 rpm · 31 L

The shaking water bath ORSHAWB combines a thermostatic water bath and a reciprocating shaker in one unit. The 31 L stainless steel tank holds the water from room temperature to 100 °C with ±0.1 °C stability, while the basket moves back and forth at 20–200 rpm. With the shaker stopped, it works as a regular laboratory water bath.

Model and order code

Model Order code Temperature Shaking Tank · basket Exterior W × D × H
ORSHAWB PRO3099 RT to 100 °C reciprocating, 20–200 rpm 31 L · 395 × 250 mm 828 × 360 × 425 mm

Flask capacity 100 ml × 12, 250 ml × 8 or 500 ml × 6. Water bath flask seat and tube rack included.

Water bath and shaker in one unit

Water transfers heat to flasks and tubes faster and more evenly than air. In ORSHAWB the samples sit in the water and are mixed at the same time, so cultures, enzyme reactions and extractions run at a constant temperature with constant movement. A soft start with adjustable start speed keeps the liquid in the flasks, and the drive locks if the speed goes out of control.

ORSHAWB shaking water bath with reciprocating basket in the stainless steel tank

Key features

  • Temperature from room temperature to 100 °C, ±0.1 °C stability, ±0.2 °C uniformity
  • Reciprocating shaking 20–200 rpm, ±1 rpm
  • Amplitude 16 or 24 mm (24 mm factory setting)
  • 31 L mirror stainless steel tank, 500 × 310 × 200 mm
  • Basket 395 × 250 mm, up to 5 kg
  • PID control with Pt100 sensor, large LCD, timer 0–9999 min
  • Soft start; over-temperature alarm, water-level and motor protection
  • All wetted and exposed parts in stainless steel

Suitable for

  • Shaken microbial cultures in flasks at constant temperature
  • Enzyme reactions, digestion and incubation of reaction mixtures
  • Extraction, dissolution and mixing of samples in tubes and flasks
  • Thawing samples and warming reagents with the shaker stopped

When to choose a shaking water bath

Choose ORSHAWB when the samples must be heated evenly by water and mixed at the same time, up to 100 °C. For shaking in air with heating and cooling see the ORSHA80 · ORSHA85 shaking incubators; for a water bath without shaking see the PURUS thermostatic water bath; for tubes and microplates in a dry block see the ALEMADR-TSHL thermo shaker.

Technical specifications

Temperature and control

Temperature RT to 100 °C
Resolution 0.1 °C
Stability ±0.1 °C
Uniformity ±0.2 °C
Control PID, Pt100, LCD
Timer 0–9999 min

Shaking and construction

Shaking reciprocating
Speed 20–200 rpm, ±1 rpm
Amplitude 16 or 24 mm
Tank 31 L, stainless steel
Basket 395 × 250 mm
Supply 220 V, 50 Hz, 1.5 kW

RT = room temperature. Values measured with water, without load. Dimensions and weight are in the PDF.

Installation and care

Place the bath on a level bench with a separate earthed 220 V socket and a drain within reach of the tank valve. Fill the tank with distilled or deionised water above the minimum level before heating, and change the water regularly to keep the stainless steel tank clean.

Standard delivery and options

ORSHAWB with lid, water bath flask seat and racks
  • Shaking water bath with 31 L stainless steel tank and reciprocating basket.
  • Water bath flask seat and tube rack.
  • Option: other flask clamps and racks on request.

The configuration for a specific order is the one confirmed in the COLO.Science quotation.

Technical documents and knowledge base

ORSHAWB technical specification (PDF) — tank and basket size, flask capacity, dimensions and configuration checklist. Methods and application notes: our knowledge base.

Configuration note

Tell us the samples, the flasks or tubes per run, the temperature and the speed. COLO.Science will confirm the basket, the clamps and the delivery time in the quotation.

Sales and support for international customers

COLO Lab ExpertsPolje ob Sotli 4, SI-3255 Buče, Slovenia
Phone: +386 70 713 437 · Email: sales@colo.si · Web: colo.si
We supply laboratories across Europe directly and through partners. B2B prices are quoted net, excluding VAT.

Need a shaking water bath for your method?

Send the samples, the flasks or tubes per run, the temperature and the speed. COLO.Science will confirm the configuration and the delivery time.

Thermostatic Baths

You may also like…

Request a Quote