Two Shops
One Shipment

MBIND Laboratory Incubator, Natural Convection, 45 to 210 L


COLO.Science · Laboratory Incubator

RT+5 °C to 70 °C · ±0.5 °C · Natural convection · PID · 45 · 65 · 125 · 210 L

COLO.Science · Incubation & Controlled Environments · Laboratory Incubator

MBIND Laboratory Incubator · Natural Convection · 45 to 210 L

The MBIND laboratory incubator keeps bacteria and other cultures at a stable temperature from 5 °C above room temperature up to 70 °C, with ±0.5 °C fluctuation. Natural convection without a fan, a microcomputer PID controller with auto-tuning and a double door with an inner tempered glass door are common to all four sizes: 45 L (PRO3333), 65 L (PRO3334), 125 L (PRO3335) and 210 L (PRO3336).

MBIND models and order codes

Model Order code Chamber volume Inner chamber W × D × H Exterior W × D × H Shelves Heating power
MBIND45 PRO3333 45 L 350 × 350 × 350 mm 525 × 480 × 620 mm 2 350 W
MBIND65 PRO3334 65 L 400 × 350 × 450 mm 614 × 577 × 625 mm 2 450 W
MBIND125 PRO3335 125 L 500 × 450 × 550 mm 675 × 580 × 820 mm 2 600 W
MBIND210 PRO3336 210 L 600 × 580 × 600 mm 775 × 710 × 870 mm 2 700 W

All four sizes share the same controller, the same double door and natural convection; they differ in chamber size and heating power. A stainless-steel chamber is available for every size. Not sure which size you need? Send the vessel type and how many you incubate at once, and we will propose the model.

Microbiological incubator with natural convection

Heat rises from the elements under the chamber and spreads through the chamber by itself — there is no fan. Samples do not dry out and no air is blown across open plates. The inner tempered glass door with a silicone seal lets you check the cultures without letting the heat out; the outer door closes with a magnetic seal.

MBIND laboratory incubator with PID controller on the door

Key features

  • Temperature RT+5 °C to 70 °C, fluctuation ±0.5 °C
  • Natural convection, no fan — gentle on open plates
  • Microcomputer PID controller with auto-tuning, digital display
  • Timer 0 to 9999 min with end signal
  • Over-temperature sound and light alarm with heating cut-off
  • Inner tempered glass door with silicone seal, outer magnetic door
  • 2 shelves supplied, 15 kg per shelf
  • Coated steel chamber; stainless-steel chamber on request

Suitable for

  • Culture of bacteria and other microorganisms in microbiology laboratories
  • Routine incubation at 30–37 °C in medical, pharmaceutical and food laboratories
  • Research in biology and biochemistry
  • Teaching and training laboratories

Why choose a natural-convection incubator

For most bacterial cultures at 30–37 °C, a quiet chamber without forced air is the safer choice: agar plates and open vessels lose less water, and nothing blows spores or aerosols around the chamber. The PID controller learns the heating behaviour of the chamber with auto-tuning, so the temperature stays within ±0.5 °C.

The user manual shows a 9-point temperature map at 37 °C with values from 35.95 °C to 37.26 °C, and heating from room temperature to about 60 °C in 30 minutes (65 L). Keep the setpoint at least 5 °C above the room and load the shelves to no more than one third of their area, so the warm air can rise freely.

Technical specifications

Performance and chamber

Air circulation natural convection, no fan
Temperature range RT+5 °C to 70 °C
Temperature fluctuation ±0.5 °C
Setting resolution 0.1 °C
Heating elements under the chamber, 350 to 700 W
Chamber coated steel; stainless steel on request
Shelves 2 supplied, 15 kg each

Control and supply

Control microcomputer PID, auto-tuning
Display / keys digital display, 4 touch keys
Timer 0 to 9999 min
Alarms over-temperature sound and light, heating cut-off
Door inner tempered glass + outer magnetic door
Vent / test hole on the top
Supply 220–240 V, 50/60 Hz

Typical values, measured without load. The setpoint must be at least 5 °C above room temperature.

Operating functions

PID control and timer

The upper display shows the measured temperature, the lower one the setpoint. The timer runs from 0 to 9999 minutes; at 0 the incubator works continuously, at the end of a timed run the display shows End and the buzzer sounds.

Auto-tuning

At a new working temperature, start the auto-tuning: the controller measures how the chamber heats up and sets its own PID parameters, so the temperature settles without overshoot.

Safety

If the temperature rises above the alarm limit, the buzzer sounds, the alarm light comes on and the heating is switched off. Internal parameters are protected by a password.

Construction, installation and care

The housing is made of cold-rolled steel sheet with a coated surface. The chamber is coated cold-rolled steel as standard, or stainless steel on request — the better choice if you disinfect the chamber often.

Place the incubator level, away from direct sun and other heat or cold sources, with free space to the wall, and connect it to an earthed 220–240 V socket. Clean with a neutral detergent and a dry cloth; do not use acids or alkalis.

Standard delivery and options

  • MBIND laboratory incubator in the chosen size.
  • 2 shelves.
  • Option: stainless-steel chamber.
  • Option: additional shelves.

The configuration for a specific order is the one confirmed in the COLO.Science quotation.

Technical documents and knowledge base

MBIND technical specification (PDF) — all four sizes, temperature map and heating curve. Methods and application notes: our knowledge base.

How to choose

  • 45 L — one user, a few racks of plates; bench-top size.
  • 65 L — daily routine of a small laboratory.
  • 125 L — a shared incubator for a group.
  • 210 L — the largest chamber, for larger series and bulky vessels.
  • Need forced air circulation? See the MBINE incubator series.

Configuration note

Tell us the vessels, how many you incubate at once and your working temperature, and whether you need a stainless-steel chamber. COLO.Science will confirm the model in the quotation.

Sales and support for international customers

COLO Lab ExpertsPolje ob Sotli 4, SI-3255 Buče, Slovenia
Phone: +386 70 713 437 · Email: sales@colo.si · Web: colo.si
We supply laboratories across Europe directly and through partners. B2B prices are quoted net, excluding VAT.

Which incubator size fits your lab?

Send the vessels, the number per run and your working temperature. COLO.Science will confirm the model and the delivery time.

SKU: MBIND Category:
Incubators

,

You may also like…

Request a Quote