COLO.SCIENCE — ROUTINE MOISTURE AND DRY-CONTENT ANALYSIS
Compact weighing, controlled drying and direct touch-screen operation
The FAMO100 laboratory moisture analyzer determines moisture by recording the initial sample mass and the mass loss generated during controlled quartz IR heating. The instrument supports both moisture determination and dry weighing determination, allowing routine laboratories to evaluate moisture percentage and solid content within a compact bench-top workflow.
A 110 g weighing range, 1 mg division, 0.01% moisture readability and an advised sample mass of 2–50 g make FAMO100 suitable for practical quality-control methods where operator simplicity, adjustable drying conditions and rapid stabilization are important.
Key characteristics
- Model: FAMO100.
- Maximum capacity: 110 g.
- Weighing readability: 0.001 g / 1 mg.
- Moisture readability: 0.01%.
- Minimum sample weight: 0.5 g.
- Advised sample weight: 2–50 g.
- Temperature range: 50°C to 180°C.
- Heating source: quartz IR lamp.
- Calibration: external.
- Sample pan: Ø90 mm.
Suitable for
- Food ingredients, raw materials and finished products.
- Grains, feed and agricultural samples.
- Pharmaceutical and chemical quality-control work.
- Powders, polymers, paper and textile samples.
- Incoming material control and process verification.
- Method development with sample-specific drying temperature and time.
- Routine laboratories requiring a compact touch-screen analyzer.
FAMO100 — LABORATORY MOISTURE ANALYZER
FAMO100 laboratory moisture analyzer for routine quality-control testing
A laboratory moisture analyzer should be selected according to sample type, representative sample mass, required result resolution, drying temperature, method duration and reporting requirements. FAMO100 provides a practical 110 g platform with 1 mg weighing readability and 0.01% moisture readability for routine laboratory work.
Quartz infrared heating can be adjusted from 50°C to 180°C in 1°C steps. The heating time can be set from 0 to 99 minutes in one-minute intervals, supporting sample-specific moisture methods for food, agricultural, pharmaceutical, chemical and industrial materials.
For documented laboratory workflows, the FAMO100 laboratory moisture analyzer can be combined with an optional thermal printer, optional USB connection and suitable OIML F1 weights for external calibration and routine control. Final accessory compatibility and documentation scope should be confirmed in the official quotation.
FAMO100 moisture analyzer, optional printer and F1 weights
FAMO100 combines 110 g capacity, 1 mg division, 0.01% moisture readability, quartz IR heating and a backlit LCD touch screen.
Optional OIML F1 weights support external calibration, routine checks, SOP control points and documented verification of the integrated weighing system.
An optional compatible thermal printer can support direct printout of moisture and weighing results when paper records are required.
FAMO100 model and catalogue selection parameters
FAMO100
Capacity: 110 g
Division: 0.001 g / 1 mg
Moisture readability: 0.01%
Minimum sample: 0.5 g
Advised sample: 2–50 g
Calibration: External
Sample pan: Ø90 mm
Temperature: 50°C–180°C
Model note: confirm the required calibration-weight nominal value, printer compatibility, optional USB connection, software scope, certificates and final documentation package in the official quotation.
TECHNICAL SPECIFICATIONS — FAMO100 LABORATORY MOISTURE ANALYZER
| Product model | FAMO100 |
| Instrument type | Laboratory moisture analyzer, touch-screen model |
| Measurement modes | Moisture determination / dry weighing determination |
| Accuracy class | Class II |
| Maximum capacity | 110 g |
| Weighing readability | 0.001 g / 1 mg |
| Moisture readability | 0.01% |
| Minimum sample weight | 0.5 g |
| Advised sample weight | 2–50 g |
| Moisture range | 0–100% |
| Dry weighing range | 100.00%–0% |
| Calibration | External |
| Heating source | Quartz IR heating lamp |
| Temperature sensor | Pt100 |
| Temperature range | 50°C–180°C |
| Temperature setting step | 1°C |
| Heating time | 0–99 min, 1 min interval |
| Display | Backlit LCD touch screen |
| Displayed content | Moisture %, solid %, weight, time and measurement data |
| Communication | RS232C standard; USB optional |
| Sample pan | Ø90 mm |
| Operating temperature | 15°C–30°C; fluctuation <5°C/h |
| Operating relative humidity | 40%–80% RH |
| Power supply | AC 110–240 V, 50/60 Hz; DC 5 V–2 A |
| Dimensions | 325 × 195 × 195 mm |
| Net / gross weight | 2.3 / 3 kg |
Final measurement performance depends on suitable sample preparation, representative sample mass, correct drying temperature and time, stable installation, levelling, external calibration, ambient conditions and the validated laboratory method. Final accessories, interfaces and documentation are confirmed in the official quotation.
STANDARD PACKAGING / STANDARD DELIVERY
Standard FAMO100 package
Included in standard packaging
- FAMO100 laboratory moisture analyzer.
- Service-certified calibration weight.
- Universal power adapter.
- Dust cover.
- Instruction manual / user documentation.
Optional configuration
- Compatible thermal printer.
- OIML F1 calibration and control weights.
- USB connection.
- Certificates and additional documentation.
- Additional sample pans and consumables, where available.
Moisture measurement workflow
1. Weigh
Place the prepared sample on the Ø90 mm pan and record the initial sample mass.
2. Heat
Apply the selected quartz IR drying temperature and programmed heating time.
3. Monitor
Follow mass loss and displayed moisture, solid, weight and time information.
4. Result
Record the final moisture or dry-content result according to the laboratory method.
OPTIONAL ACCESSORIES AND CALIBRATION SUPPORT
Optional F1 weights, printer and USB connection
FAMO100 uses external calibration. Suitable OIML F1 weights may therefore be selected for calibration and routine verification. Printer and USB options should be matched to the required laboratory reporting and communication workflow.
OIML F1 calibration weights
Suitable for external calibration, independent routine checks, SOP control points and documented verification of the weighing platform.
Optional thermal printer
Supports direct paper records when laboratory procedures require printout of moisture or weighing results.
Optional communication workflow
- RS232C standard interface.
- USB connection optional.
- Printer compatibility should be confirmed.
- Final data workflow and documentation should be specified before ordering.
Ordering note: confirm the calibration-weight nominal value, printer compatibility, optional USB connection, certificate requirements and final documentation package in the official quotation.
MOISTURE ANALYZERS
Compare laboratory moisture analyzers and moisture meters
Use the moisture analyzer category to compare FAMO100 with other instruments for laboratory moisture determination, grain moisture measurement and dry-content analysis.
COLO.SCIENCE KNOWLEDGE AND SUPPORT
Selection support for moisture methods, sample mass and calibration
COLO.Science supports moisture-analyzer selection, sample-mass planning, drying-temperature definition, external calibration, F1 weight selection, printer workflow and documentation requirements.
How to select and configure FAMO100
Before ordering a laboratory moisture analyzer, define the sample material, expected moisture level, representative sample mass and suitable drying temperature. FAMO100 is recommended for sample masses from 2 g to 50 g, while the minimum permitted sample weight is 0.5 g.
The second step is method and documentation planning. Confirm the required heating time, whether standard RS232C is sufficient, whether optional USB or a printer is needed, and which F1 calibration-weight nominal value and certificate should be supplied.
FAMO100 laboratory moisture analyzer for compact bench-top testing
The FAMO100 laboratory moisture analyzer is designed for users who need a compact and practical instrument for daily moisture and dry-content measurements. Its quartz IR heating source, Pt100 temperature sensor, backlit touch screen and adjustable drying conditions support controlled testing across a broad range of laboratory samples.
Reliable operation depends on representative sampling, uniform sample distribution, correct drying temperature and time, stable installation, proper levelling and regular external calibration. Optional F1 weights, printer and USB connection can be selected according to the laboratory procedure and reporting requirement.
Configuration notice
FAMO100 may be supplied with different accessories and documentation depending on the application. The official quotation defines the calibration-weight value, printer compatibility, optional USB connection, certificates and final delivery scope. Specifications may change without notice.
