COLO.Science · Laboratory Support · Glassware washers
LAVADO laboratory glassware washer — 158 and 185 L, injector washing, up to 93 °C
The LAVADO laboratory glassware washer series replaces hand washing of laboratory glassware with a programmed, reproducible cycle: pre-wash, detergent wash, neutralisation, rinsing with tap and purified water and — on the LAVADO190 — hot-air drying through a HEPA filter. Narrow-neck glassware such as volumetric flasks, bottles, vials and pipettes is washed from the inside by injector nozzles; beakers and jars are washed in open baskets by rotating spray arms. Two models share the same controller and loading system: the LAVADO160 with one two-tier rack and the LAVADO190 with two racks and drying.
Models and order codes
| Model | Order code | Chamber | Loading · height | Hot-air drying | Exterior W × D × H |
|---|---|---|---|---|---|
| LAVADO160 | PRO5884 | 158 L | 1 rack, 2 tiers · 374 mm | no | 640 × 726 × 778 mm |
| LAVADO190 | PRO3696 | 185 L | 2 racks · 251 / 244 mm | 0–120 °C, HEPA H13 | 670 × 691 × 940 mm |
Both models: wash water up to 93 °C · chamber AISI 316L · 8.8″ touch screen, 30 + 120 programs · two detergent pumps · purified-water pump · 220 V, 5 kW. Racks, modules and baskets are chosen by glassware type and ordered separately.
Clean glassware without hand washing — the same result every cycle
Hand washing depends on who washes and how long. A glassware washer runs the same temperatures, times and detergent doses every time and records each cycle, so cleaning becomes a controlled step of the laboratory method instead of a daily chore.

Key characteristics
- 158 or 185 L chamber in AISI 316L stainless steel; one two-tier rack or two racks.
- Injector washing for narrow-neck glassware, spray arms for open glassware.
- Wash water up to 93 °C, 4 kW heater, variable-speed circulation pump up to 500 L/min.
- Final rinse with purified water by the built-in pump; two automatic detergent pumps.
- Hot-air drying with HEPA H13 on the LAVADO190 — glassware comes out dry.
- 150 programs, 3 users, audit trail and automatic door opening at the end of the cycle.
Suitable for
- Analytical and QC laboratories — volumetric flasks, beakers, bottles, chromatography vials and pipettes.
- Food, flavour and pharmaceutical laboratories that need a documented cleaning cycle.
- Microbiology laboratories — bottles, tubes and Petri dishes washed at high temperature.
- University and research laboratories with mixed glassware every day.
LAVADO160 or LAVADO190
- LAVADO160 · 158 L, one two-tier rack — an injector module above and an open basket below in the same cycle, total loading height 374 mm, up to 2 modules; compact. No drying: glassware is drained and dried on a rack or in a drying oven.
- LAVADO190 · 185 L, two racks — two full levels of 251 and 244 mm, up to 4 modules per cycle, for example beakers above and volumetric flasks below; hot-air drying with HEPA filter, door window, SD card and printer port.
- Same loading system — racks, modules and baskets are common to both models, so the set grows with the laboratory.
LAVADO160 · two-tier rack, 158 L
Loading system — racks, modules and baskets
Each level carries one rack (on the LAVADO160 a two-tier rack). A rack without spray arm feeds the injector modules from the back of the chamber; a rack with spray arm washes the open baskets placed on it. The module or basket is chosen by the glassware.

- Beakers + volumetric flasks: upper R-US + K-F open basket, lower R-L + M-B21.
- Beakers + chromatography vials: upper R-US + K-F, lower R-L + M-V150.
- Bottles: R-U + M-B8 for 250–2000 mL, R-L + M-S25 for 500 mL sample bottles.
- Pipettes + tubes: R-U + M-P102, R-L + M-T102.
Injector modules
| PRO4866 · M-B8 | 8 bottles and flasks 250–2000 mL |
| PRO8345 · PRO8346 · M-B21 / M-B32 | 21 or 32 volumetric flasks 50–250 mL |
| PRO8347 · PRO8348 · M-B50 / M-B66 | 50 or 66 volumetric flasks 10–100 mL |
| PRO5637 · PRO5638 · M-S25 / M-S20 | 25 × 500 mL or 20 × 1000 mL sample bottles |
| PRO5645 · PRO5646 · M-V150 / M-V102 | 150 or 102 chromatography vials 2 mL |
| PRO5647 · PRO5648 · M-T102 / M-P102 | 102 tubes · 102 pipettes |
| PRO5649 – PRO5658 · M-X… | Hybrid modules: vials, pipettes, tubes and 100 mL flasks together |
Racks and open baskets
| PRO5632 · R-US | Upper rack with spray arm, for baskets |
| PRO4868 · R-U | Upper rack without spray arm, for injector modules |
| PRO5633 · R-L | Lower rack without spray arm, for injector modules |
| PRO8354 · R-LS | Two-tier rack with spray arm: module above, basket below |
| PRO5662 · PRO5659 · K-F / K-H | Open basket, full or half level: beakers, jars, caps |
| PRO5663 · K-PD | Half basket for 30 Petri dishes Ø 60–150 mm |
| PRO5661 · PRO5660 · K-T / K-TS | Quarter racks for tubes 10–20 mL |
LAVADO laboratory glassware washer — technical specifications
Chamber, water and washing
| Chamber volume | LAVADO160 158 L · LAVADO190 185 L |
| Chamber W × D × H | 547 × 575 × 507 mm · 547 × 575 × 607 mm |
| Loading | 1 two-tier rack (374 mm) · 2 racks (251 and 244 mm) |
| Circulation pump | 0.37 kW, 0–400 L/min · 0.75 kW, 0–500 L/min, variable speed |
| Wash water heating | 4 kW, 0–93 °C; over-temperature alarm at ≥ 86 °C set limit |
| Hot-air drying | LAVADO190: 1.5 kW, 0–120 °C, fan 110 m³/h, HEPA H13 |
| Water inlets | Tap water > 0.1 MPa and purified water (built-in pump, 7 L/min) |
| Drain | Drain pump 12 L/min, Ø 25 mm hose, 3 m |
| Detergent dosing | 2 peristaltic pumps, 2.5 mL/s, low-level alarm |
Control, build and general data
| Controller | 8.8″ touch screen · 30 standard and 120 user programs |
| Users · records | 3 users, 3 password levels · audit trail · basket recognition |
| Data (LAVADO190) | SD card · RS232 printer port |
| Door | Electric lock, automatic opening at end of cycle; window on LAVADO190 |
| Materials | Chamber AISI 316L · housing AISI 304 |
| Exterior W × D × H | 640 × 726 × 778 mm · 670 × 691 × 940 mm |
| Power supply | 220 V AC, 50 Hz, single-phase, 5 kW |
| Loading system | Racks, injector modules and baskets, ordered separately |
| Series code | LAVADO |
Operating functions
Programs
Thirty standard programs cover typical residues — quick wash, grease and oil, protein, inorganic salts — and 120 user programs can be built step by step. Each step has its own water source, temperature, time and detergent dose.
Water and detergents
The washer takes tap water for washing and purified water for the final rinse, fed by its built-in pump from a tank or a water system. Two peristaltic pumps dose alkaline detergent and neutraliser from containers next to the washer and warn when a container runs low.
Users, records and safety
Three users with three password levels, an audit trail and basket recognition document who ran which program. The electric door lock stays closed during the cycle, the water over-temperature alarm protects the glassware, and the door opens automatically at the end so steam can escape.
Build, power supply and installation
Chamber and water path in AISI 316L stainless steel, housing in AISI 304. The washer needs a 220 V, 50 Hz single-phase connection for 5 kW, cold tap water above 0.1 MPa, purified water from a tank or system, and a drain within the 3 m hose. Leave space at the back for the steam outlet.
Standard delivery
- LAVADO glassware washer of the chosen model with two built-in detergent pumps.
- Water inlet hoses and drain hose.
- Operating manual.
- Declaration of conformity and warranty documentation.
Racks, modules, baskets and detergents are ordered separately according to the glassware. The delivered configuration is the one stated in the COLO.Science quotation.
Technical documents
LAVADO technical specification (PDF) — both models, all parameters, the loading system with order codes and configuration examples.
Selection guide
- Glassware list. Types and sizes — beakers, volumetric flasks, bottles, vials, pipettes, tubes — and pieces per day.
- Quantity per cycle. Up to 2 modules: LAVADO160. Up to 4 modules or taller glassware on two levels: LAVADO190.
- Drying. Glassware needed dry at the end of the cycle: LAVADO190.
- Residues. Organic, fat, protein or inorganic — decides the program and the detergent.
- Site. 220 V / 5 kW, tap water, purified water, drain within 3 m.
Configuration notice
This page is provided for orientation and product selection. It does not replace the binding specification, the delivered configuration or the acceptance criteria confirmed in the official COLO.Science quotation, proforma invoice or order confirmation. Confirm the model, the racks and modules and the installation requirements of the LAVADO laboratory glassware washer for the specific order. B2B prices are quoted net, excluding VAT.
Sales and support for international customers
COLO Lab ExpertsPolje ob Sotli 4, SI-3255 Buče, Slovenia
Phone: +386 70 713 437 · Email: sales@colo.si · Web: colo.si
We supply laboratories across Europe directly and through partners. B2B prices are quoted net, excluding VAT.





