CENSD2000 balance, M1 calibration weights and routine weighing accessories
CENSD2000 precision balance with 2000 g capacity, 0.01 g readability, dual LCD display, external calibration, large 143 × 192 mm pan and rechargeable accumulator.
Optional OIML M1 weight set can support routine verification, calibration planning and multi-point control checks according to laboratory SOP.
Optional single M1 calibration weights are selected according to nominal mass, OIML class, certificate requirement and the laboratory verification procedure.
TECHNICAL SPECIFICATIONS — CENSD2000 PRECISION BALANCE
| Model | CENSD2000 |
| SKU | PRO3261 |
| Product type | Precision / industrial balance |
| Maximum capacity | 2000 g |
| Readability / resolution | 0.01 g |
| Measuring cell | High-precision load cell |
| Calibration | External calibration |
| Calibration method | External linear calibration |
| Pan dimensions | 143 × 192 mm |
| Display | Dual LCD display with backlight |
| Controls | Capacitive touch keys |
| Weighing units | g, ct, oz, lb, GN, %, pcs |
| Standard weighing | Supported |
| Percentage weighing | Supported through % unit |
| Parts counting | Supported through pcs unit |
| Mains supply | 220 V adapter |
| Battery supply | Integrated rechargeable accumulator |
| Data collection | PC communication and data software available as an option |
| Calibration weight | Optional certified or control weight for external calibration |
Values are provided for product selection and routine configuration. Minimum load, repeatability, linearity, stabilization time, housing dimensions, net weight and environmental limits are not stated in the supplied source and should be confirmed during quotation when required.
Calibration, power supply and data workflow
External calibration
CENSD2000 uses external calibration with an external linear calibration method. For controlled use, the correct calibration weight and certificate should be selected according to the laboratory SOP.
Dual power supply
The balance can operate with a 220 V adapter and includes an integrated rechargeable accumulator. This supports fixed bench operation and occasional mains-independent weighing.
Optional PC software
Optional software can support data collection and measurement control. Interface, software scope and data workflow should be confirmed before quotation when digital documentation is needed.
OPTIONAL CALIBRATION AND CONTROL WEIGHTS
Optional OIML M1 weights for external calibration and routine verification
For routine checking and external calibration of the CENSD2000 precision balance, suitable calibration or control weights should be selected as optional accessories. The required nominal mass, accuracy class and certificate type depend on the laboratory method, calibration routine and traceability requirement.
M1 weight set 1 mg–500 g
Optional 24-piece M1 set for lower and middle verification points, routine control checks and multi-point balance verification procedures.
SKU: PRO5291 · Open product
M1 calibration weight 1 kg
Optional 1 kg M1 weight for routine checks, external calibration support and control procedures in laboratory or QC environments.
SKU: PRO5284 · Open product
Selection logic
- Select weights according to the working range and SOP control points.
- Define whether a certified weight or routine control weight is required.
- Choose nominal mass values close to typical tare and sample loads.
- Confirm certificate, traceability and handling requirements before ordering.
Ordering note: calibration weights, certificates, PC software and communication accessories are optional unless explicitly included in the quotation.
Applications and laboratory value
Routine laboratory weighing
The CENSD2000 precision balance is suitable for daily sample, reagent and container weighing where 2000 g capacity and 0.01 g readability are required.
Quality control
The balance can be used for incoming inspection, batch checks, production control and repeated weighing tasks in laboratory and industrial QC environments.
Education and demonstration
Dual LCD result visibility helps demonstrations and shared reading of weighing results, making CENSD2000 practical for teaching and training laboratories.
Counting and percentage work
Selectable units, including pcs and %, support practical counting and percentage weighing workflows when the method is suitable for the sample and tolerance.
WEIGHING CATALOG
Compare precision balances and weighing accessories
Use the weighing catalog to compare the CENSD2000 precision balance with other precision balances, technical balances, analytical balances, calibration weights and weighing accessories. For application notes, selection logic and laboratory weighing guidance, visit COLO.Science.
