Two Shops
One Shipment

RAKAPOSHI-WR12 Walk-in Plant Growth Room, 11.5 m², 16 LED Shelves


Walk-in plant growth room with LED racks, temperature and RH control

11.5 m² · 16 LED shelves · 18–35 °C · 50–90 % RH · 350 µmol/m²·s

COLO.Science · Testing & Characterization · Walk-in plant growth rooms

RAKAPOSHI-WR12 walk-in plant growth room — 11.5 m² lit area, 16 LED shelves, 18–35 °C

The RAKAPOSHI-WR12 walk-in plant growth room is a room-sized plant growth chamber for research groups that have outgrown reach-in chambers. Researchers walk in among 4 stainless steel racks, each shelf lit by its own dimmable LED panel, and temperature, humidity and light follow one day and night program from a 10″ touch screen at the door. The Basic version gives 11.52 m² of lit growing area in a room of 2310 × 2910 mm; light spectrum, shelves, low temperature, humidity, CO₂, cameras and access control are chosen as options. Product code PRO8331.

Growth-room capacity with chamber-level control

A walk-in room gives the same programmed day to hundreds of pots and trays at once. Dawn, day, dusk and night run in time segments, light rises and falls gradually, and temperature and humidity follow the same program — season after season, independent of the building.

RAKAPOSHI-WR12 walk-in plant growth room door and control panel with touch screen

Key characteristics · Basic version

  • 4 racks × 4 lit shelves, 11.52 m² growing area, growth height 43 cm; 2, 3 or 5 shelves per rack as option.
  • Temperature 18–35 °C with lights on and off, fluctuation ≤0.5 °C; options from 5 °C or −10 °C.
  • Humidity 50–90 % RH, fluctuation ≤3 % RH, Vaisala HMP60 probe; option from 40 % RH.
  • LED panel above every shelf, white 350 µmol/m²·s at 10 cm, dimmable; colour spectra up to 1600 µmol/m²·s.
  • Even climate on every shelf — vertical laminar flow through mesh air-flow walls; climate units in the ceiling cavity.
  • 10″ touch screen and smartphone app for programs, status and settings.

Suitable for

  • Plant research institutes and universities — model plants and crops in large numbers under one climate.
  • Breeding and seed programs — seedlings, young plants and generation cycles independent of the season.
  • Photobiology and stress studies — light quality, intensity, temperature and humidity at room scale.
  • Tissue culture and plantlet hardening on multi-tier racks.
  • Algae and aquatic organisms in flasks and culture vessels, with CO₂ control as an option.

Why a walk-in plant growth room

Reach-in chambers are limited by their cabinet; a greenhouse follows the weather. A walk-in plant growth room puts the controlled day of a chamber into a space where people work standing among the racks, with room for whole experiment series, replicates and genotypes side by side.

In the RAKAPOSHI-WR12 the air is supplied through mesh walls on both sides and returned on top, so plants on the lower shelf see the same climate as plants on the top one. Cooling, heating, humidifying and dehumidifying units sit in the ceiling cavity — the whole floor is for racks and the service aisle.

Room sizes, product codes and shelf configurations

RAKAPOSHI-WR12COLO product code: PRO8331
4 racks × 4 shelves · 11.52 m² · exterior 2310 × 2910 × 3000 mm
RAKAPOSHI-WR17COLO product code: PRO8332
6 racks × 4 shelves · 17.28 m² · exterior 2310 × 4200 × 3000 mm

Shelves per rack — growth height and area

2 shelves per rack 95 cm growth height · 5.76 m²
3 shelves per rack 60 cm · 8.64 m²
4 shelves per rack · standard 43 cm · 11.52 m²
5 shelves per rack 32 cm · 14.40 m²

Lighting configurations

White · standard Full spectrum 400–700 nm, 350 µmol/m²·s at 10 cm
White · other intensity 300, 700, 1000, 1200 or 1600 µmol/m²·s
Single colour Blue 450 nm, red 660 nm or far-red 735 nm
Three colours Blue 450 · red 660 · far-red 735 nm
Four colours R·B·FR plus white, or R·G·B·FR
Seven colours B · R · FR · UV-A · UV-B · UV-C · white
Eighteen colours 18 bands from 365 to 950 nm
Tall-plant version No racks, 80/130/170 W lamps hung from the ceiling

RAKAPOSHI-WR12 walk-in plant growth room — technical specifications

Room, climate and growing area

Room size · exterior W × D × H 2310 × 2910 × 3000 mm
Racks × lit shelves 4 stainless steel racks × 4 shelves = 16 shelves
Lit growing area 11.52 m² · growth height 43 cm
Temperature range 18–35 °C with lights on and off; options 5–35 °C or −10–35 °C
Temperature fluctuation · resolution ≤0.5 °C · 0.1 °C
Humidity range 50–90 % RH with lights on and off; option 40–90 % RH
Humidity fluctuation · precision ≤3 % RH · 1 % RH
Sensor Vaisala HMP60 temperature and humidity probe
Air circulation Vertical laminar flow, mesh air-flow walls, return-air filter on top, fresh-air exchange
CO₂ control Option: ambient to 2000 ppm (5000 ppm on request)

Light, control and general data

Lighting LED panel above each shelf, full-spectrum white 400–700 nm
Light intensity 350 µmol/m²·s at 10 cm; options up to 1600 µmol/m²·s
Light control Dimmable 0–100 %, time-segment programs with the climate
Lighting options Single colour, three, four, seven (with UV) or eighteen colours
Controller 10″ touch screen at the door, PID control
Remote access Smartphone app for status and settings
Refrigeration Heat recovery, variable-frequency control, heat-pump heating; units in the ceiling cavity
Construction Polyurethane insulated panels; AISI 304 racks and air-flow walls; door with window
Installation Delivered in modules, installed and commissioned on site by COLO.Science
Product code PRO8331

Operating functions

Day and night programs

Temperature, humidity and light intensity are set for each time segment and repeat day after day, so gradual sunrise and sunset, long-day and short-day photoperiods run without manual switching. In multi-colour configurations each colour channel follows its own curve.

Climate system

Compressor refrigeration with heat recovery and variable-frequency control, heat-pump heating and controlled fresh-air exchange keep the set point with PID control, without electric heaters or a separate dehumidifier. Where the site allows, the heat can be removed with cooling water.

Monitoring, data and access

The smartphone app shows the room status and settings remotely. Options add one or two cameras, independent data loggers for temperature, humidity, light (PAR/DLI) and CO₂, remote alarms, a UPS for the controller and a smart access lock with RFID card, fingerprint or Wi-Fi and an access log.

Construction, site requirements and installation

Walk-in growth room construction with insulated panels, air-flow wall and LED racks

Polyurethane insulated wall and ceiling panels, an insulated door with observation window, modular racks and air-flow walls in stainless steel AISI 304. The room is delivered in modules and assembled on site, so it passes through ordinary building doors.

Before the quotation COLO.Science checks the site: electrical supply and main fuse, position of the cooling unit and cooling water, water for humidification and drain, network connection for the app, CO₂ supply and clear height above 3000 mm. Installation, commissioning and user training are part of the delivery.

Delivery and services

  • RAKAPOSHI-WR12 room in modules with 4 racks × 4 shelves and white LED panels — Basic version.
  • Control panel with 10″ touch screen, smartphone app.
  • Site check, layout drawing, installation, commissioning and user training by COLO.Science.
  • Operating manual, declaration of conformity and warranty documentation.

On request: IQ / OQ qualification and climate mapping, service contract with preventive maintenance, extended warranty and removal of an existing room. The delivered configuration is the one stated in the COLO.Science quotation.

Knowledge base

Testing equipment on COLO.Science — our knowledge base.

Applications and research upgrades

Plants on LED-lit stainless steel racks inside a walk-in growth room

Plant experiments are only comparable when the conditions are. The RAKAPOSHI-WR12 walk-in plant growth room gives every pot on every shelf the same programmed day — and with data loggers documents that it did.

For tall plants and climbers the racks can be left out and full-spectrum LED lamps hung from the ceiling. Research upgrades include hydroponic racks with nutrient circulation, rail-type phenotyping on the racks, hyperspectral and chlorophyll fluorescence imaging.

For smaller plant numbers the RAKAPOSHI series continues with reach-in plant growth chambers, and the same LED panels are available as the stand-alone LUMA line for racks and existing rooms.

Selection guide

  • Room size. WR12 fits a space of about 2.3 × 3 m; WR17 about 2.3 × 4.2 m; other sizes on request.
  • Plant height. Four shelves for seedlings and rosette plants; three or two for taller plants; tall-plant version without racks.
  • Light. White 350 µmol/m²·s for general growth; up to 1600 µmol/m²·s for light-demanding crops; colour spectra for photobiology.
  • Climate. Below 18 °C or below 50 % RH needs the low-temperature or low-humidity module.
  • Site. Power, cooling, water, drain, network and CO₂ supply are checked before the quotation.

Configuration notice

This page is provided for orientation and product selection. It does not replace the binding specification, the delivered configuration or the acceptance criteria confirmed in the official COLO.Science quotation, proforma invoice or order confirmation. Room size, options and site requirements of the RAKAPOSHI-WR12 are confirmed for the specific project. B2B prices are quoted net, excluding VAT.

Sales and support for international customers

COLO Lab ExpertsPolje ob Sotli 4, SI-3255 Buče, Slovenia
Phone: +386 70 713 437 · Email: sales@colo.si · Web: colo.si
We supply laboratories across Europe directly and through partners. B2B prices are quoted net, excluding VAT.

Planning a walk-in plant growth room?

Send the available space, the species, the photoperiod, the temperature and humidity program and the light you need. COLO.Science will propose the room size, the lighting and the options, check the site and install and commission the room.

SKU: PRO8331 Category:

Request a Quote