CIBAH-HP — High Precision Heating Circulating Bath (15 L, 0.001°C)
OVERVIEW
CIBAH-HP high precision circulating baths are selected for laboratory workflows where tight temperature stability
and reproducibility matter. The system keeps temperature uniform within the tank and supports precise control for calibration,
validation and regulated QC routines.
The bath supports internal use and external circulation via a built-in pump, enabling a stable secondary
temperature field for connected equipment. A microprocessor controller with PT100 sensor provides accurate monitoring
and fine setpoint control. (Heating models: Ambient + 5°C and above; no sub-ambient cooling range.)
TECHNICAL SPECIFICATIONS — CIBAH-15HP (15 L)
| Model | CIBAH-15HP |
| Bath volume | 15 L class (tank: 300 × 240 × 200 mm) |
| Temperature range | Ambient + 5°C ~ 80°C |
| Display / resolution | Digital display; 0.001°C (0.01°C also referenced; 0.001°C optional) |
| Temperature fluctuation | ±0.005°C ~ ±0.01°C |
| Precision (as listed) | ±0.05°C |
| Pump flow (external circulation) | 6 L/min |
| Bath opening (mm) | 235 × 160 |
| Bath depth (mm) | 200 |
| Controller / sensor | Microprocessor controller with PT100 sensor |
| Safety & alarms | Adjustable upper/lower temperature alarms; audible & visible alarm for temperature and water level; 3-minute power-off protection delay |
| Tank material | High-quality stainless steel inner chamber |
| Power supply | 220 V, 50 Hz |
| PDF reference | Open CIBAH-HP technical sheet (PDF) |
Manufacturer reserves the right to change technical specifications. Always confirm the exact configuration in the official PDF.
MODEL COMPARISON — CIBAH-HP SERIES
| Model | Temp. range | Stability / fluctuation | Resolution | Tank (mm) | Top opening (mm) |
|---|---|---|---|---|---|
| CIBAH-15HP | Ambient + 5 ~ 80°C | ±0.005 ~ ±0.01°C | 0.001°C | 300 × 240 × 200 | 235 × 160 |
| CIBAH-15HPS | Ambient + 5 ~ 200°C | ±0.005 ~ ±0.02°C | 0.001°C | 300 × 240 × 200 | 235 × 160 |
| CIBAH-30HP | Ambient + 5 ~ 95°C | ±0.005 ~ ±0.01°C | 0.001°C | 400 × 330 × 230 | 310 × 280 |
| CIBAH-30HPS | Ambient + 5 ~ 200°C | ±0.005 ~ ±0.02°C | 0.001°C | 400 × 330 × 230 | 310 × 280 |
Series table shown for selection guidance; confirm the exact configuration and options in the official PDF.
Selection note
High precision circulating baths are typically selected according to required temperature range, stability and external circulation needs.
For calibration/validation/QC workflows, always confirm documentation and available options in the official technical sheet.
Optional accessory: RS485 connector.
