COLO.Science · Pipette Tips · NichimateAqua
NichimateAqua Marine Tips 200 µL long, Sterile · Sterile Racks
NichimateAqua Marine Tips 200 µL long, Sterile is an affordable standard tip in a sterile rack with good liquid drainage. It is electron-beam sterilized and DNase, RNase and pyrogen (endotoxin) free.
Economical Nichiryo pipette tips – 200 µL long

Key features
- Affordable standard tip in a sterile rack
- Good liquid drainage
- Electron-beam sterilized
- DNase / RNase / pyrogen (endotoxin) free
- Sterile racks of 960 tips (10 × 96)
- Fits Nichiryo pipettes of matching volume
Packaging options

NichimateAqua Marine
960 pcs · sterile
NichimateAqua Marine in sterile racks: electron-beam sterilized, DNase, RNase and pyrogen (endotoxin) free. Not recommended for repeated autoclaving.
Technical specifications
Tip
| Nominal volume | 200 µL |
| Version | long tip |
| Marine version | electron-beam sterilized; DNase / RNase / pyrogen free |
| Autoclaving | Marine racks not recommended for repeated autoclaving |
Packaging
| NichimateAqua Marine | sterile rack, 960 pcs |
Typical applications
NichimateAqua tips are made for everyday pipetting where reliable results and a low cost per tip matter.
- Routine dispensing of buffers, reagents and aqueous solutions.
- Sample preparation in analytical, food and environmental laboratories.
- Teaching laboratories and high-volume routine work.
- Sterile routine work with NichimateAqua Marine in sterile racks.
Compatible Nichiryo pipettes
These Nichiryo pipettes take this tip:
How to choose
- Routine, non-sterile – NichimateAqua bulk bag or refill stacks.
- Sterile, ready to use – NichimateAqua Marine rack.
- Proteins, detergents, viscous liquids – see Nichiryo Low Retention tips.
- Highest accuracy – Nichiryo tests every pipette before shipment with Premium tips.
- Other sizes – see the NichimateAqua tips page.
Handling tips for accurate results
- Press the pipette firmly into the tip with a slight twist – a good seal is the basis of accurate volumes.
- Pre-wet the tip once or twice with the sample before the measured aspiration, especially with viscous liquids and detergents.
- Aspirate slowly with the tip just below the liquid surface and dispense against the vessel wall.
- Use a new tip for every sample; with sterile work open the rack only next to the working area.
- Store tips in their original packaging, protected from dust and direct sunlight.
More methods and application notes on pipetting are available in our knowledge base.
Sales and support for international customers
COLO Lab ExpertsPolje ob Sotli 4, SI-3255 Buče, Slovenia
Phone: +386 70 713 437 · Email: sales@colo.si · Web: colo.si
We supply laboratories across Europe directly and through partners. B2B prices are quoted net, excluding VAT.




